Reinforced Stainless Steel Bollard

Product Code:
£174.00 £145.00

Order Today get it by 26.04.2024*




Here at Street Furniture Direct the Stainless Steel Bollard is one of our most popular bollards we offer. These bollards have been used in a wide range of projects from shopping centres and town centres to petrol stations and other high traffic areas. We are able to provide a wide range of options on all of our Stainless Steel Bollards from different diameters, to a range of different caps.

The cap we provide as standard is a semi domed top but there are choices available including; a welded flat cap, or a mitred top, along with many more for a small extra cost. If you do require a different cap please contact one of our trained advisers.

Our Stainless Steel Bollards are provided as standard in Grade 304. Grade 316 is also available, suitable for saline atmospheres such as coastal areas. The Stainless Steel finish will make it so it doesn't look out of place in a modern project.

The Reinforced Stainless Steel Bollard is available in 3 standard diameters; 101mm, 114mm, 140mm (other dimensions are possible on request). Manufactured with an internal steel core adding strength to withstand impacts from any direction. Hazard Banding strips are also available for additional visibility at night. The Reinforced Stainless Steel Bollards offers the benefits of Anit-Ram for added security and protection for any area.

We hold in stock 101mm and 114mm diameter with semi dome top in grade 304, an order of theses would be with you within 48 hours. For other versions, the lead time will be 2-3 weeks. 

If you are looking for a selection of bollards or to create a collection of street furniture, let us know and we can help you put together a full solution.


Weight 25.00 kg
Length 1500mm
Diameter 114mm
Fixing Root Fixed
Material Stainless Steel
Colour Brushed Satin
Street Furniture Direct

Reinforced Stainless Steel Bollard FAQs

We recommend choosing the Reinforced Stainless Steel Bollard if you require a more secure bollard that will handle vehicular impact better than the standard Stainless Steel Bollard.
The Reinforced Stainless Steel Bollard has the same visual exterior as the standard Stainless Steel Bollard. It is reinforced through an internal steel core. The Reinforced Stainless Steel Bollard is more secure and less likely to be severely damaged from vehicular impact.
The Reinforced Stainless Steel Bollard is available in either Grade of stainless steel. Grade 304 and grade 316 are the two standard grades of stainless steel that are used for all our bollard manufacturing. Grade 304 Stainless Steel is more cost effective and is perfectly adequate for use in most external environments in the UK. Grade 316 Stainless Steel is superior to grade 304, due to being able to handle extreme exposure to corrosive saline elements, therefore Grade 316 Stainless Steel should be chosen for UK coastal locations. It is worth noting that both grades are identical in appearance and will equally tarnish if they are not regularly maintained.
The Reinforced Stainless Steel Bollard is available in 3 different top cap designs. The most popular choice is the semi-domed top cap, especially for highstreets, as it is considered the most aesthetically pleasing and it allows for water run off. The Mitred top is considered a liability in busy locations for possibly causing injuries however it also allows for water run off. The Flat top can be a target for litter, particularly drinks cartons and bottles which is unsightly and may require additional cleaning. However the top caps are chosen by personal preference of the buyer and can be selected to match existing bollards.
The Reinforced Stainless Steel Bollard is available in 101mm, 114mm, and 140mm Diameters. The larger 140mm Diameter will require an additional lead time. There are no physical benefits to choosing a larger diameter bollard as they are all manufactured in 2.5 gauge thickness stainless steel unless requested otherwise. The main reason for choosing a diameter is down to personal preference on the visual outcome.
Reflective coloured Hazard Banding increases visibility, particularly at night, in low light or where there is no street lighting. Hazard Banding is only advised if the bollard is being installed in a location that will assist with directing traffic or reduce the chances of vehicular collisions – especially cars reversing on car parks. As standard we sell the red, white or yellow hazard banding in either a single or double band. There is no significance in the choice of colours.
The Reinforced Stainless Steel Bollard can only be root fixed. The Reinforced Stainless Steel Bollard has a standard height of 1500mm. We recommend digging a hole to a depth of 400mm, fill the first 100mm with Type 1 MOT Crushed Concrete (approved for use by the Ministry of Transport). Then fill the rest with concrete and install the bollard with the spigots down into the concrete to ensure it cannot be removed. Leave to set.
The Reinforced Stainless Steel Bollard will not rust. It will however tarnish and have a ‘tea stain’ effect on the surface after a period of time. It is easily removed by simply cleaning with warm water.
The Reinforced Stainless Steel bollard will need to be replaced after a severe car incident has occurred to ensure it is adequately performing and to prevent further damage. The Reinforced Stainless Steel Bollard is more robust than the standard Stainless Steel Bollard so should better handle the impact of a vehicle.
The Reinforced Stainless Steel Bollard is made with an internal steel core which is then covered with the outer bollard shell made from a single stainless steel sheet that is machine rolled into a tube. The top cap and two spigots are welded to it. The bollard is then brush polished with a grit belt or wheel to create the standard Brushed Satin Finish.
The Stainless Steel Bollard weighs 25 kilograms equivalent to a 50-inch TV or 3 watermelons. A single bollard should not be carried alone, multiple units will require a pallet and forklift for transport.
There are many locations where the Reinforced Stainless Steel Bollard can be installed to provide protection to both people and buildings. A prime location is high footfall and car traffic areas such as the divide between car parking spaces and pedestrian walkways, this can be at shopping centres, town centres, and even for independent shops with private car parks. Entrances and exits to places by vehicle, particularly narrow spaces with walls or paths nearby. Other locations include, fuel stations, pub and restaurant private car parks, storefronts, and even near bus stops.
The Reinforced Stainless Steel Bollard has a guaranteed warranty for 1 year however it should last for a significantly longer period depending on location, how often it is cleaned and whether it has been physically damaged or vandalised.
Homepage Dots

Customer Reviews

Leave Your Review

Finding the right Access Control for you

Home : we have a range of affordable bollards for home use, if you are tired of parking issues outside your property, looking to keep your parking space reserved, or just need that extra level of security for your vehicles at night. With our extensive range of bollards we’ve got you covered. Fold down and telescopic bollards allow for optional protection when access is still required. 

Industrial : Bollards in industrial environments require an extra level of durability and visibility. We offer reinforced / ram deterrent bollards to protect structures, equipment and staff. Our plastic bollards provide high visibility while offering flexibility in cases of collisions. Ideal for way finding and demarcation without risking damage to vehicles. 

Retail : Shopping centres and retail parks require highly durable Access Control due to heavy footfall whilst also having consideration for the surrounding aesthetics and architects. Popular options for this sector include Stainless Steel, Recycled Plastic, Timber, as well as reinforced / ram deterrent bollards for fronting buildings.

Fold Down / Telescopic Bollards : Ideal for business parks and industrial estates where varied levels of security are required at certain times of the day and working week. Our telescopic bollards sit flush at ground level to avoid a tripping hazard. When lifted and locked they deter any unwanted drivers or thieves. Fold down bollards offer the same protection but at a smaller cost due to ease of Installation.